Services for the home.
Window replacement or casing
This shed was modeled after the main house since it was going to be somewhat prominent in the backyard.
It is 10 feet by 15, so it can actually hold a decent amount of stuff! It even has electric run to it so it has lights and outlets.
Not much to look at when we started.
Starting to take shape…
Nice to get some siding on it!
Completed the shed.
This garden shed had been planned for a number of years by the homeowner. Once we got the go ahead to build the shed, we were done in a little over a week.
Framing the walls took less than a day.
The shed was built to closely the match the finish of the main house that can be seen further back in the yard.
The paint really finished it off. The eaves were closed in, and the fascia was painted to match the main house.
The windows that we framed in were used ones supplied by the homeowner that had been removed from the main house during a previous remodel.
This Jack and Jill bathroom needed some updating as it was mostly original from 1959. The homeowners wanted a classic style bathroom remodel. As with all projects, deconstruction had to come first. The bathroom was stripped down to the studs and the ceiling joists. This process was messy, and all of the old plaster and tile had to go out the small window.
One of the requested upgrades was the removal of the outward swinging doors that were taking up too much wall space in each of the adjoining bedrooms.
New pocket doors were installed, followed by new drywall on the ceiling and the walls.
The shower surround has a niche for shampoo and soap, finished with metal tile trim.
The vanity was a pre-built piece that had to be placed before the door trim was put into place. The vanity was trimmed out with wood at the same time that the base and crown moldings were installed. The new pocket doors were put into place, and this bathroom was finished!
The floor was installed with minimum grout lines (laid out without spacers) for the cleanest look possible.
For those of you that want to learn how to cut crown molding with coped corners (I think the best way to do it), check out this video on YouTube: https://youtu.be/3MT9iVtiOEY
This house was built in the 50’s and was not only looking dated, it was so energy inefficient that it was costing the homeowners money to leave it that way. While updating the style, we also updated it to modern standards for energy efficiency.
The windows were all single pane and were so small that the inside of the house was always dark. The concrete bricks were starting to deteriorate as well, and had to go.
The upstairs part of the house wasn’t much better. The windows had to be replaced, the fascia all around, and the siding had to come off so that all the exterior walls could be insulated.
The attic needed a new vent, so we made one onsite for a custom look instead of just installing a boring premade one.
This kitchen had last been updated several decades ago, and even then it did not address some of the huge issues that were limiting it’s potential. It was a small, galley style with a drop down ceiling and dated tile.
The homeowners wanted an open concept kitchen and great room, so this kitchen wall that housed the sink and ovens had to go. The sliding door at the far end had to come out too as this was to become the window over the new farmhouse style sink.
The layout was done to maximize the open site lines required for open concept, and also to provide enough storage for a functional kitchen.
The new custom cabinets were built in place. The only thing left was to wait for the cabinet and door fronts to arrive to finish installation.
The range hood was installed and the granite countertops were laid to finish the kitchen.